This is the higher speed Extreme version of the Intel X25 series solid state hard drive. This model boasts faster write speeds than its lower priced cousin, the X25-M.
This drive is a standard 2.5" SATA form factor that will replace most traditional 2.5" hard drives in notebooks, servers or other devices.
Technical specifications
| Model name |
Intel® X25-E Extreme SATA Solid-State Drive |
| Capacity |
64GB |
| NAND Flash components |
Intel® Single-Level Cell (SLC) NAND Flash Memory
10 Parallel Channel Architecture with 50nm SLC ONFI 1.0 NAND |
| Bandwidth |
Sustained sequential read: up to 250 MB/s
Sustained sequential write: up to 170 MB/s |
| Read Latency |
75 microseconds |
| I/O Per Second (IOPS) |
Random 4KB Reads: >35,000 IOPS
Random 4KB Writes: >3,300 IOPS
|
| Interface |
SATA 1.5 Gb/s and 3.0 Gb/s |
| Form factor |
2.5" by 7mm industry standard hard drive form factor |
| Compatibility |
SATA Revision 2.6 Compliant. Compatible with SATA 3 Gb/s with Native Command Queuing and SATA 1.5 Gb/s interface rates |
| Life expectancy |
2 Million Hours Mean Time Before Failure (MTBF) |
| Power consumption |
Active: 2.4W Typical (server workload¹)
Idle (DIPM): 0.06 W Typical |
| Operating shock |
1,000G / 0.5ms |
| Voltage |
5V SATA supply rail |
| Operating temperature |
0°C to +70°C |
| RoHS compliant |
Meets the requirements of EU RoHS Compliance Directives |
| Product health monitoring |
Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.) commands, plus additional SSD monitoring |